laboratory scale extruder

CHT30 Twin Screw Extruder for Laboratory& Small Scale Production Special laboratory: CHT30-Eco Lab Extruder Sepcification 1.0 Raw materials dealing units 1.1 High speed mixer Total volume:300L Effective volume:225L Capacity:110kg/time Motor power: 40/55kw Heating power: 9kw Main shaft speed: 480/964rpm Unload way: pneumatic Electric control parts: Siemens brand contactor and breaker. Suzhou Air switch. Taiwan AirTac Solenoid valve. 1.2 High speed mixer Total volume:200L

UW10 Under Water Pelletizer for laboratory and small scale production with capacity of max.80kg/hr Technical specification No. Denomination of the delivery Qty. 1.0 Under water pelletizing line 1.1 Adaptor 1set This adaptor will connect extruder with COWIN UW10 under water pelletizing system 1.2 Diverter valve 1set Including adaptor Made of 38CrMoAlA,Nitrified Flow channel structure: 90 degree discharge Hydraulic driving Solenoid valve control Cast-copper heater: 2.2kw

20mm twin screw laboratory extruder line for plastic compounding. Special laboratory:CHT20-Eco using integrated mode, all systems are installed on the main base, as long asaccess to power and water can be put into use.As the segment structure design, the equipment can be configured with different L/D, barrel designs,screen changer, pelletizing system, and electric control, to flexible meet unique requirements of different process.In order to aid to our better understanding of

CHT30-Eco high torque twin screw extruder for laboratory use Special laboratory: CHT30-Eco Lab Extruder Sepcification No. Denomination of the delivery 1.0 Raw materials dealing units 1.1 Volumetric Motor power:0.37kw, Feeding mode: by twin screw Material contact parts are made of 304 stainless steel Volume:20L, Capacity: 5-50kg/hr Inverter: Parker 1.2 High speed side feeder Metering feeder: 0.37kw Inverter: Parker By twin screw Material contact parts are made of 304 stainless

CHT30 Twin Screw Extruder with under water pelletizing system CHT30-Eco twin screw extrusion line with under water pelletizing system is mainly used for thermoplastic compounding for lab or small scale production. The application is various for TPU, TPE, TPR,TPV,TPO,hot melt, also for masterbatch production. Motor power: 18.5kw Rotation speed: 600rpm Frquency inverter Bimetal-linear L/D: 44 Elctric heating Under water pelletizing system Diverter valve Melt pump(optional)

CHT30-Eco-UW10 Under Water Pelletizizing system for laboratory and small scale production with capacity of max.80kg/hr Technical specification No. Denomination of the delivery Qty. 1.0 Raw materials dealing units 1.1 Main feeder 1set Motor power:0.37kw, ABB inverter Feeding mode: by twin screw Material contact parts are made of 304 stainless steel Volume:20L, Capacity: 20-80kg/hr With horizontal agitator inside the hopper 2.0 CHT30-Eco granulating unit 2.1 CHT30-Eco twin