Search Results For:

lft pellet production line

5 Products Found

LFT D Extrusionslinie A PP Glasfaser und Kohlefaser Leistung 200kg/h

LFT-D Extrusion line for PA,PP, glass fiber and Carbon Fiber with output 200kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃ The excellent properties

50 kg/h Zwillingschraubenausdrückungslinie FT D Beschichtung P und Glasfaser

50kg/hr Twin Screw Extrusion Line for LFT-D Coating with PP+Glass Fiber General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃ The excellent properties are as

LFRT-Doppelschnecken-Extrusionslinie mit Glasfaserbeschichtung und 500 kg/h Kapazität

LFT-D Long Fiber Glass CoatingTwin Screw Extrusion Line for 500kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃ The excellent properties are as

Doppelschnecken-LFRT-Extrusionslinie 0-100kg/h Leistung für Langfaserverstärkung

General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃ The excellent properties are as following: Non-oriented gridding structure enables it can keep the original

Doppelschraubende LFRT-Extrusionsmaschine aus PP-Glasfaser mit 400 kg Std.

LFT-D Extrusion line for PA,PP, glass fiber and Glass Fiber with output 400kg/hr General Introduction of LFT Long-fiberReinforce Thermoplastic(LFRT), the length of the fiber glass is bigger than 3mm, while the commercialized LFRT is normally 6-25mm. The modulus of long fiber reinforcement is double than that of short fiber reinforcement, while impact tension is four times, can keep its function without any change under the temperature of minus 30℃ The excellent properties are